Module java.base
Package java.time

Class Instant

java.lang.Object
java.time.Instant
All Implemented Interfaces:
Serializable, Comparable<Instant>, Temporal, TemporalAccessor, TemporalAdjuster
public final class Instant
extends Object
implements Temporal, TemporalAdjuster, Comparable<Instant>, Serializable
An instantaneous point on the time-line.

This class models a single instantaneous point on the time-line. This might be used to record event time-stamps in the application.

The range of an instant requires the storage of a number larger than a long. To achieve this, the class stores a long representing epoch-seconds and an int representing nanosecond-of-second, which will always be between 0 and 999,999,999. The epoch-seconds are measured from the standard Java epoch of 1970-01-01T00:00:00Z where instants after the epoch have positive values, and earlier instants have negative values. For both the epoch-second and nanosecond parts, a larger value is always later on the time-line than a smaller value.

Time-scale

The length of the solar day is the standard way that humans measure time. This has traditionally been subdivided into 24 hours of 60 minutes of 60 seconds, forming a 86400 second day.

Modern timekeeping is based on atomic clocks which precisely define an SI second relative to the transitions of a Caesium atom. The length of an SI second was defined to be very close to the 86400th fraction of a day.

Unfortunately, as the Earth rotates the length of the day varies. In addition, over time the average length of the day is getting longer as the Earth slows. As a result, the length of a solar day in 2012 is slightly longer than 86400 SI seconds. The actual length of any given day and the amount by which the Earth is slowing are not predictable and can only be determined by measurement. The UT1 time-scale captures the accurate length of day, but is only available some time after the day has completed.

The UTC time-scale is a standard approach to bundle up all the additional fractions of a second from UT1 into whole seconds, known as leap-seconds. A leap-second may be added or removed depending on the Earth's rotational changes. As such, UTC permits a day to have 86399 SI seconds or 86401 SI seconds where necessary in order to keep the day aligned with the Sun.

The modern UTC time-scale was introduced in 1972, introducing the concept of whole leap-seconds. Between 1958 and 1972, the definition of UTC was complex, with minor sub-second leaps and alterations to the length of the notional second. As of 2012, discussions are underway to change the definition of UTC again, with the potential to remove leap seconds or introduce other changes.

Given the complexity of accurate timekeeping described above, this Java API defines its own time-scale, the Java Time-Scale.

The Java Time-Scale divides each calendar day into exactly 86400 subdivisions, known as seconds. These seconds may differ from the SI second. It closely matches the de facto international civil time scale, the definition of which changes from time to time.

The Java Time-Scale has slightly different definitions for different segments of the time-line, each based on the consensus international time scale that is used as the basis for civil time. Whenever the internationally-agreed time scale is modified or replaced, a new segment of the Java Time-Scale must be defined for it. Each segment must meet these requirements:

  • the Java Time-Scale shall closely match the underlying international civil time scale;
  • the Java Time-Scale shall exactly match the international civil time scale at noon each day;
  • the Java Time-Scale shall have a precisely-defined relationship to the international civil time scale.
There are currently, as of 2013, two segments in the Java time-scale.

For the segment from 1972-11-03 (exact boundary discussed below) until further notice, the consensus international time scale is UTC (with leap seconds). In this segment, the Java Time-Scale is identical to UTC-SLS. This is identical to UTC on days that do not have a leap second. On days that do have a leap second, the leap second is spread equally over the last 1000 seconds of the day, maintaining the appearance of exactly 86400 seconds per day.

For the segment prior to 1972-11-03, extending back arbitrarily far, the consensus international time scale is defined to be UT1, applied proleptically, which is equivalent to the (mean) solar time on the prime meridian (Greenwich). In this segment, the Java Time-Scale is identical to the consensus international time scale. The exact boundary between the two segments is the instant where UT1 = UTC between 1972-11-03T00:00 and 1972-11-04T12:00.

Implementations of the Java time-scale using the JSR-310 API are not required to provide any clock that is sub-second accurate, or that progresses monotonically or smoothly. Implementations are therefore not required to actually perform the UTC-SLS slew or to otherwise be aware of leap seconds. JSR-310 does, however, require that implementations must document the approach they use when defining a clock representing the current instant. See Clock for details on the available clocks.

The Java time-scale is used for all date-time classes. This includes Instant, LocalDate, LocalTime, OffsetDateTime, ZonedDateTime and Duration.

This is a value-based class; use of identity-sensitive operations (including reference equality (==), identity hash code, or synchronization) on instances of Instant may have unpredictable results and should be avoided. The equals method should be used for comparisons.

Implementation Requirements:
This class is immutable and thread-safe.
Since:
1.8
See Also:
Serialized Form

  • Field Summary

    Fields 
    Modifier and Type Field Description
    static Instant EPOCH
    Constant for the 1970-01-01T00:00:00Z epoch instant.
    static Instant MAX
    The maximum supported Instant, '1000000000-12-31T23:59:59.999999999Z'.
    static Instant MIN
    The minimum supported Instant, '-1000000000-01-01T00:00Z'.

  • Method Summary

    Modifier and Type Method Description
    Temporal adjustInto​(Temporal temporal)
    Adjusts the specified temporal object to have this instant.
    OffsetDateTime atOffset​(ZoneOffset offset)
    Combines this instant with an offset to create an OffsetDateTime.
    ZonedDateTime atZone​(ZoneId zone)
    Combines this instant with a time-zone to create a ZonedDateTime.
    int compareTo​(Instant otherInstant)
    Compares this instant to the specified instant.
    boolean equals​(Object otherInstant)
    Checks if this instant is equal to the specified instant.
    static Instant from​(TemporalAccessor temporal)
    Obtains an instance of Instant from a temporal object.
    int get​(TemporalField field)
    Gets the value of the specified field from this instant as an int.
    long getEpochSecond()
    Gets the number of seconds from the Java epoch of 1970-01-01T00:00:00Z.
    long getLong​(TemporalField field)
    Gets the value of the specified field from this instant as a long.
    int getNano()
    Gets the number of nanoseconds, later along the time-line, from the start of the second.
    int hashCode()
    Returns a hash code for this instant.
    boolean isAfter​(Instant otherInstant)
    Checks if this instant is after the specified instant.
    boolean isBefore​(Instant otherInstant)
    Checks if this instant is before the specified instant.
    boolean isSupported​(TemporalField field)
    Checks if the specified field is supported.
    boolean isSupported​(TemporalUnit unit)
    Checks if the specified unit is supported.
    Instant minus​(long amountToSubtract, TemporalUnit unit)
    Returns a copy of this instant with the specified amount subtracted.
    Instant minus​(TemporalAmount amountToSubtract)
    Returns a copy of this instant with the specified amount subtracted.
    Instant minusMillis​(long millisToSubtract)
    Returns a copy of this instant with the specified duration in milliseconds subtracted.
    Instant minusNanos​(long nanosToSubtract)
    Returns a copy of this instant with the specified duration in nanoseconds subtracted.
    Instant minusSeconds​(long secondsToSubtract)
    Returns a copy of this instant with the specified duration in seconds subtracted.
    static Instant now()
    Obtains the current instant from the system clock.
    static Instant now​(Clock clock)
    Obtains the current instant from the specified clock.
    static Instant ofEpochMilli​(long epochMilli)
    Obtains an instance of Instant using milliseconds from the epoch of 1970-01-01T00:00:00Z.
    static Instant ofEpochSecond​(long epochSecond)
    Obtains an instance of Instant using seconds from the epoch of 1970-01-01T00:00:00Z.
    static Instant ofEpochSecond​(long epochSecond, long nanoAdjustment)
    Obtains an instance of Instant using seconds from the epoch of 1970-01-01T00:00:00Z and nanosecond fraction of second.
    static Instant parse​(CharSequence text)
    Obtains an instance of Instant from a text string such as 2007-12-03T10:15:30.00Z.
    Instant plus​(long amountToAdd, TemporalUnit unit)
    Returns a copy of this instant with the specified amount added.
    Instant plus​(TemporalAmount amountToAdd)
    Returns a copy of this instant with the specified amount added.
    Instant plusMillis​(long millisToAdd)
    Returns a copy of this instant with the specified duration in milliseconds added.
    Instant plusNanos​(long nanosToAdd)
    Returns a copy of this instant with the specified duration in nanoseconds added.
    Instant plusSeconds​(long secondsToAdd)
    Returns a copy of this instant with the specified duration in seconds added.
    <R> R query​(TemporalQuery<R> query)
    Queries this instant using the specified query.
    ValueRange range​(TemporalField field)
    Gets the range of valid values for the specified field.
    long toEpochMilli()
    Converts this instant to the number of milliseconds from the epoch of 1970-01-01T00:00:00Z.
    String toString()
    A string representation of this instant using ISO-8601 representation.
    Instant truncatedTo​(TemporalUnit unit)
    Returns a copy of this Instant truncated to the specified unit.
    long until​(Temporal endExclusive, TemporalUnit unit)
    Calculates the amount of time until another instant in terms of the specified unit.
    Instant with​(TemporalAdjuster adjuster)
    Returns an adjusted copy of this instant.
    Instant with​(TemporalField field, long newValue)
    Returns a copy of this instant with the specified field set to a new value.

    Methods declared in class java.lang.Object

    clone, finalize, getClass, notify, notifyAll, wait, wait, wait

  • Field Details

    • EPOCH

      public static final Instant EPOCH
      Constant for the 1970-01-01T00:00:00Z epoch instant.

    • MIN

      public static final Instant MIN
      The minimum supported Instant, '-1000000000-01-01T00:00Z'. This could be used by an application as a "far past" instant.

      This is one year earlier than the minimum LocalDateTime. This provides sufficient values to handle the range of ZoneOffset which affect the instant in addition to the local date-time. The value is also chosen such that the value of the year fits in an int.

    • MAX

      public static final Instant MAX
      The maximum supported Instant, '1000000000-12-31T23:59:59.999999999Z'. This could be used by an application as a "far future" instant.

      This is one year later than the maximum LocalDateTime. This provides sufficient values to handle the range of ZoneOffset which affect the instant in addition to the local date-time. The value is also chosen such that the value of the year fits in an int.

  • Method Details

    • now

      public static Instant now()
      Obtains the current instant from the system clock.

      This will query the system UTC clock to obtain the current instant.

      Using this method will prevent the ability to use an alternate time-source for testing because the clock is effectively hard-coded.

      Returns:
      the current instant using the system clock, not null

    • now

      public static Instant now​(Clock clock)
      Obtains the current instant from the specified clock.

      This will query the specified clock to obtain the current time.

      Using this method allows the use of an alternate clock for testing. The alternate clock may be introduced using dependency injection.

      Parameters:
      clock - the clock to use, not null
      Returns:
      the current instant, not null

    • ofEpochSecond

      public static Instant ofEpochSecond​(long epochSecond)
      Obtains an instance of Instant using seconds from the epoch of 1970-01-01T00:00:00Z.

      The nanosecond field is set to zero.

      Parameters:
      epochSecond - the number of seconds from 1970-01-01T00:00:00Z
      Returns:
      an instant, not null
      Throws:
      DateTimeException - if the instant exceeds the maximum or minimum instant

    • ofEpochSecond

      public static Instant ofEpochSecond​(long epochSecond, long nanoAdjustment)
      Obtains an instance of Instant using seconds from the epoch of 1970-01-01T00:00:00Z and nanosecond fraction of second.

      This method allows an arbitrary number of nanoseconds to be passed in. The factory will alter the values of the second and nanosecond in order to ensure that the stored nanosecond is in the range 0 to 999,999,999. For example, the following will result in exactly the same instant: 

        Instant.ofEpochSecond(3, 1);
  Instant.ofEpochSecond(4, -999_999_999);
  Instant.ofEpochSecond(2, 1000_000_001);
      Parameters:
      epochSecond - the number of seconds from 1970-01-01T00:00:00Z
      nanoAdjustment - the nanosecond adjustment to the number of seconds, positive or negative
      Returns:
      an instant, not null
      Throws:
      DateTimeException - if the instant exceeds the maximum or minimum instant
      ArithmeticException - if numeric overflow occurs

    • ofEpochMilli

      public static Instant ofEpochMilli​(long epochMilli)
      Obtains an instance of Instant using milliseconds from the epoch of 1970-01-01T00:00:00Z.

      The seconds and nanoseconds are extracted from the specified milliseconds.

      Parameters:
      epochMilli - the number of milliseconds from 1970-01-01T00:00:00Z
      Returns:
      an instant, not null
      Throws:
      DateTimeException - if the instant exceeds the maximum or minimum instant

    • from

      public static Instant from​(TemporalAccessor temporal)
      Obtains an instance of Instant from a temporal object.

      This obtains an instant based on the specified temporal. A TemporalAccessor represents an arbitrary set of date and time information, which this factory converts to an instance of Instant.

      The conversion extracts the INSTANT_SECONDS and NANO_OF_SECOND fields.

      This method matches the signature of the functional interface TemporalQuery allowing it to be used as a query via method reference, Instant::from.

      Parameters:
      temporal - the temporal object to convert, not null
      Returns:
      the instant, not null
      Throws:
      DateTimeException - if unable to convert to an Instant

    • parse

      public static Instant parse​(CharSequence text)
      Obtains an instance of Instant from a text string such as 2007-12-03T10:15:30.00Z.

      The string must represent a valid instant in UTC and is parsed using DateTimeFormatter.ISO_INSTANT.

      Parameters:
      text - the text to parse, not null
      Returns:
      the parsed instant, not null
      Throws:
      DateTimeParseException - if the text cannot be parsed

    • isSupported

      public boolean isSupported​(TemporalField field)
      Checks if the specified field is supported.

      This checks if this instant can be queried for the specified field. If false, then calling the range, get and with(TemporalField, long) methods will throw an exception.

      If the field is a ChronoField then the query is implemented here. The supported fields are:

      • NANO_OF_SECOND
      • MICRO_OF_SECOND
      • MILLI_OF_SECOND
      • INSTANT_SECONDS
      All other ChronoField instances will return false.

      If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.isSupportedBy(TemporalAccessor) passing this as the argument. Whether the field is supported is determined by the field.

      Specified by:
      isSupported in interface TemporalAccessor
      Parameters:
      field - the field to check, null returns false
      Returns:
      true if the field is supported on this instant, false if not

    • isSupported

      public boolean isSupported​(TemporalUnit unit)
      Checks if the specified unit is supported.

      This checks if the specified unit can be added to, or subtracted from, this date-time. If false, then calling the plus(long, TemporalUnit) and minus methods will throw an exception.

      If the unit is a ChronoUnit then the query is implemented here. The supported units are:

      • NANOS
      • MICROS
      • MILLIS
      • SECONDS
      • MINUTES
      • HOURS
      • HALF_DAYS
      • DAYS
      All other ChronoUnit instances will return false.

      If the unit is not a ChronoUnit, then the result of this method is obtained by invoking TemporalUnit.isSupportedBy(Temporal) passing this as the argument. Whether the unit is supported is determined by the unit.

      Specified by:
      isSupported in interface Temporal
      Parameters:
      unit - the unit to check, null returns false
      Returns:
      true if the unit can be added/subtracted, false if not

    • range

      public ValueRange range​(TemporalField field)
      Gets the range of valid values for the specified field.

      The range object expresses the minimum and maximum valid values for a field. This instant is used to enhance the accuracy of the returned range. If it is not possible to return the range, because the field is not supported or for some other reason, an exception is thrown.

      If the field is a ChronoField then the query is implemented here. The supported fields will return appropriate range instances. All other ChronoField instances will throw an UnsupportedTemporalTypeException.

      If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.rangeRefinedBy(TemporalAccessor) passing this as the argument. Whether the range can be obtained is determined by the field.

      Specified by:
      range in interface TemporalAccessor
      Parameters:
      field - the field to query the range for, not null
      Returns:
      the range of valid values for the field, not null
      Throws:
      DateTimeException - if the range for the field cannot be obtained
      UnsupportedTemporalTypeException - if the field is not supported

    • get

      public int get​(TemporalField field)
      Gets the value of the specified field from this instant as an int.

      This queries this instant for the value of the specified field. The returned value will always be within the valid range of values for the field. If it is not possible to return the value, because the field is not supported or for some other reason, an exception is thrown.

      If the field is a ChronoField then the query is implemented here. The supported fields will return valid values based on this date-time, except INSTANT_SECONDS which is too large to fit in an int and throws a DateTimeException. All other ChronoField instances will throw an UnsupportedTemporalTypeException.

      If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.getFrom(TemporalAccessor) passing this as the argument. Whether the value can be obtained, and what the value represents, is determined by the field.

      Specified by:
      get in interface TemporalAccessor
      Parameters:
      field - the field to get, not null
      Returns:
      the value for the field
      Throws:
      DateTimeException - if a value for the field cannot be obtained or the value is outside the range of valid values for the field
      UnsupportedTemporalTypeException - if the field is not supported or the range of values exceeds an int
      ArithmeticException - if numeric overflow occurs

    • getLong

      public long getLong​(TemporalField field)
      Gets the value of the specified field from this instant as a long.

      This queries this instant for the value of the specified field. If it is not possible to return the value, because the field is not supported or for some other reason, an exception is thrown.

      If the field is a ChronoField then the query is implemented here. The supported fields will return valid values based on this date-time. All other ChronoField instances will throw an UnsupportedTemporalTypeException.

      If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.getFrom(TemporalAccessor) passing this as the argument. Whether the value can be obtained, and what the value represents, is determined by the field.

      Specified by:
      getLong in interface TemporalAccessor
      Parameters:
      field - the field to get, not null
      Returns:
      the value for the field
      Throws:
      DateTimeException - if a value for the field cannot be obtained
      UnsupportedTemporalTypeException - if the field is not supported
      ArithmeticException - if numeric overflow occurs

    • getEpochSecond

      public long getEpochSecond()
      Gets the number of seconds from the Java epoch of 1970-01-01T00:00:00Z.

      The epoch second count is a simple incrementing count of seconds where second 0 is 1970-01-01T00:00:00Z. The nanosecond part is returned by getNano().

      Returns:
      the seconds from the epoch of 1970-01-01T00:00:00Z

    • getNano

      public int getNano()
      Gets the number of nanoseconds, later along the time-line, from the start of the second.

      The nanosecond-of-second value measures the total number of nanoseconds from the second returned by getEpochSecond().

      Returns:
      the nanoseconds within the second, always positive, never exceeds 999,999,999

    • with

      public Instant with​(TemporalAdjuster adjuster)
      Returns an adjusted copy of this instant.

      This returns an Instant, based on this one, with the instant adjusted. The adjustment takes place using the specified adjuster strategy object. Read the documentation of the adjuster to understand what adjustment will be made.

      The result of this method is obtained by invoking the TemporalAdjuster.adjustInto(Temporal) method on the specified adjuster passing this as the argument.

      This instance is immutable and unaffected by this method call.

      Specified by:
      with in interface Temporal
      Parameters:
      adjuster - the adjuster to use, not null
      Returns:
      an Instant based on this with the adjustment made, not null
      Throws:
      DateTimeException - if the adjustment cannot be made
      ArithmeticException - if numeric overflow occurs

    • with

      public Instant with​(TemporalField field, long newValue)
      Returns a copy of this instant with the specified field set to a new value.

      This returns an Instant, based on this one, with the value for the specified field changed. If it is not possible to set the value, because the field is not supported or for some other reason, an exception is thrown.

      If the field is a ChronoField then the adjustment is implemented here. The supported fields behave as follows:

      • NANO_OF_SECOND - Returns an Instant with the specified nano-of-second. The epoch-second will be unchanged.
      • MICRO_OF_SECOND - Returns an Instant with the nano-of-second replaced by the specified micro-of-second multiplied by 1,000. The epoch-second will be unchanged.
      • MILLI_OF_SECOND - Returns an Instant with the nano-of-second replaced by the specified milli-of-second multiplied by 1,000,000. The epoch-second will be unchanged.
      • INSTANT_SECONDS - Returns an Instant with the specified epoch-second. The nano-of-second will be unchanged.

      In all cases, if the new value is outside the valid range of values for the field then a DateTimeException will be thrown.

      All other ChronoField instances will throw an UnsupportedTemporalTypeException.

      If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.adjustInto(Temporal, long) passing this as the argument. In this case, the field determines whether and how to adjust the instant.

      This instance is immutable and unaffected by this method call.

      Specified by:
      with in interface Temporal
      Parameters:
      field - the field to set in the result, not null
      newValue - the new value of the field in the result
      Returns:
      an Instant based on this with the specified field set, not null
      Throws:
      DateTimeException - if the field cannot be set
      UnsupportedTemporalTypeException - if the field is not supported
      ArithmeticException - if numeric overflow occurs

    • truncatedTo

      public Instant truncatedTo​(TemporalUnit unit)
      Returns a copy of this Instant truncated to the specified unit.

      Truncating the instant returns a copy of the original with fields smaller than the specified unit set to zero. The fields are calculated on the basis of using a UTC offset as seen in toString. For example, truncating with the MINUTES unit will round down to the nearest minute, setting the seconds and nanoseconds to zero.

      The unit must have a duration that divides into the length of a standard day without remainder. This includes all supplied time units on ChronoUnit and DAYS. Other units throw an exception.

      This instance is immutable and unaffected by this method call.

      Parameters:
      unit - the unit to truncate to, not null
      Returns:
      an Instant based on this instant with the time truncated, not null
      Throws:
      DateTimeException - if the unit is invalid for truncation
      UnsupportedTemporalTypeException - if the unit is not supported

    • plus

      public Instant plus​(TemporalAmount amountToAdd)
      Returns a copy of this instant with the specified amount added.

      This returns an Instant, based on this one, with the specified amount added. The amount is typically Duration but may be any other type implementing the TemporalAmount interface.

      The calculation is delegated to the amount object by calling TemporalAmount.addTo(Temporal). The amount implementation is free to implement the addition in any way it wishes, however it typically calls back to plus(long, TemporalUnit). Consult the documentation of the amount implementation to determine if it can be successfully added.

      This instance is immutable and unaffected by this method call.

      Specified by:
      plus in interface Temporal
      Parameters:
      amountToAdd - the amount to add, not null
      Returns:
      an Instant based on this instant with the addition made, not null
      Throws:
      DateTimeException - if the addition cannot be made
      ArithmeticException - if numeric overflow occurs

    • plus

      public Instant plus​(long amountToAdd, TemporalUnit unit)
      Returns a copy of this instant with the specified amount added.

      This returns an Instant, based on this one, with the amount in terms of the unit added. If it is not possible to add the amount, because the unit is not supported or for some other reason, an exception is thrown.

      If the field is a ChronoUnit then the addition is implemented here. The supported fields behave as follows:

      • NANOS - Returns an Instant with the specified number of nanoseconds added. This is equivalent to plusNanos(long).
      • MICROS - Returns an Instant with the specified number of microseconds added. This is equivalent to plusNanos(long) with the amount multiplied by 1,000.
      • MILLIS - Returns an Instant with the specified number of milliseconds added. This is equivalent to plusNanos(long) with the amount multiplied by 1,000,000.
      • SECONDS - Returns an Instant with the specified number of seconds added. This is equivalent to plusSeconds(long).
      • MINUTES - Returns an Instant with the specified number of minutes added. This is equivalent to plusSeconds(long) with the amount multiplied by 60.
      • HOURS - Returns an Instant with the specified number of hours added. This is equivalent to plusSeconds(long) with the amount multiplied by 3,600.
      • HALF_DAYS - Returns an Instant with the specified number of half-days added. This is equivalent to plusSeconds(long) with the amount multiplied by 43,200 (12 hours).
      • DAYS - Returns an Instant with the specified number of days added. This is equivalent to plusSeconds(long) with the amount multiplied by 86,400 (24 hours).

      All other ChronoUnit instances will throw an UnsupportedTemporalTypeException.

      If the field is not a ChronoUnit, then the result of this method is obtained by invoking TemporalUnit.addTo(Temporal, long) passing this as the argument. In this case, the unit determines whether and how to perform the addition.

      This instance is immutable and unaffected by this method call.

      Specified by:
      plus in interface Temporal
      Parameters:
      amountToAdd - the amount of the unit to add to the result, may be negative
      unit - the unit of the amount to add, not null
      Returns:
      an Instant based on this instant with the specified amount added, not null
      Throws:
      DateTimeException - if the addition cannot be made
      UnsupportedTemporalTypeException - if the unit is not supported
      ArithmeticException - if numeric overflow occurs

    • plusSeconds

      public Instant plusSeconds​(long secondsToAdd)
      Returns a copy of this instant with the specified duration in seconds added.

      This instance is immutable and unaffected by this method call.

      Parameters:
      secondsToAdd - the seconds to add, positive or negative
      Returns:
      an Instant based on this instant with the specified seconds added, not null
      Throws:
      DateTimeException - if the result exceeds the maximum or minimum instant
      ArithmeticException - if numeric overflow occurs

    • plusMillis

      public Instant plusMillis​(long millisToAdd)
      Returns a copy of this instant with the specified duration in milliseconds added.

      This instance is immutable and unaffected by this method call.

      Parameters:
      millisToAdd - the milliseconds to add, positive or negative
      Returns:
      an Instant based on this instant with the specified milliseconds added, not null
      Throws:
      DateTimeException - if the result exceeds the maximum or minimum instant
      ArithmeticException - if numeric overflow occurs

    • plusNanos

      public Instant plusNanos​(long nanosToAdd)
      Returns a copy of this instant with the specified duration in nanoseconds added.

      This instance is immutable and unaffected by this method call.

      Parameters:
      nanosToAdd - the nanoseconds to add, positive or negative
      Returns:
      an Instant based on this instant with the specified nanoseconds added, not null
      Throws:
      DateTimeException - if the result exceeds the maximum or minimum instant
      ArithmeticException - if numeric overflow occurs

    • minus

      public Instant minus​(TemporalAmount amountToSubtract)
      Returns a copy of this instant with the specified amount subtracted.

      This returns an Instant, based on this one, with the specified amount subtracted. The amount is typically Duration but may be any other type implementing the TemporalAmount interface.

      The calculation is delegated to the amount object by calling TemporalAmount.subtractFrom(Temporal). The amount implementation is free to implement the subtraction in any way it wishes, however it typically calls back to minus(long, TemporalUnit). Consult the documentation of the amount implementation to determine if it can be successfully subtracted.

      This instance is immutable and unaffected by this method call.

      Specified by:
      minus in interface Temporal
      Parameters:
      amountToSubtract - the amount to subtract, not null
      Returns:
      an Instant based on this instant with the subtraction made, not null
      Throws:
      DateTimeException - if the subtraction cannot be made
      ArithmeticException - if numeric overflow occurs

    • minus

      public Instant minus​(long amountToSubtract, TemporalUnit unit)
      Returns a copy of this instant with the specified amount subtracted.

      This returns an Instant, based on this one, with the amount in terms of the unit subtracted. If it is not possible to subtract the amount, because the unit is not supported or for some other reason, an exception is thrown.

      This method is equivalent to plus(long, TemporalUnit) with the amount negated. See that method for a full description of how addition, and thus subtraction, works.

      This instance is immutable and unaffected by this method call.

      Specified by:
      minus in interface Temporal
      Parameters:
      amountToSubtract - the amount of the unit to subtract from the result, may be negative
      unit - the unit of the amount to subtract, not null
      Returns:
      an Instant based on this instant with the specified amount subtracted, not null
      Throws:
      DateTimeException - if the subtraction cannot be made
      UnsupportedTemporalTypeException - if the unit is not supported
      ArithmeticException - if numeric overflow occurs

    • minusSeconds

      public Instant minusSeconds​(long secondsToSubtract)
      Returns a copy of this instant with the specified duration in seconds subtracted.

      This instance is immutable and unaffected by this method call.

      Parameters:
      secondsToSubtract - the seconds to subtract, positive or negative
      Returns:
      an Instant based on this instant with the specified seconds subtracted, not null
      Throws:
      DateTimeException - if the result exceeds the maximum or minimum instant
      ArithmeticException - if numeric overflow occurs

    • minusMillis

      public Instant minusMillis​(long millisToSubtract)
      Returns a copy of this instant with the specified duration in milliseconds subtracted.

      This instance is immutable and unaffected by this method call.

      Parameters:
      millisToSubtract - the milliseconds to subtract, positive or negative
      Returns:
      an Instant based on this instant with the specified milliseconds subtracted, not null
      Throws:
      DateTimeException - if the result exceeds the maximum or minimum instant
      ArithmeticException - if numeric overflow occurs

    • minusNanos

      public Instant minusNanos​(long nanosToSubtract)
      Returns a copy of this instant with the specified duration in nanoseconds subtracted.

      This instance is immutable and unaffected by this method call.

      Parameters:
      nanosToSubtract - the nanoseconds to subtract, positive or negative
      Returns:
      an Instant based on this instant with the specified nanoseconds subtracted, not null
      Throws:
      DateTimeException - if the result exceeds the maximum or minimum instant
      ArithmeticException - if numeric overflow occurs

    • query

      public <R> R query​(TemporalQuery<R> query)
      Queries this instant using the specified query.

      This queries this instant using the specified query strategy object. The TemporalQuery object defines the logic to be used to obtain the result. Read the documentation of the query to understand what the result of this method will be.

      The result of this method is obtained by invoking the TemporalQuery.queryFrom(TemporalAccessor) method on the specified query passing this as the argument.

      Specified by:
      query in interface TemporalAccessor
      Type Parameters:
      R - the type of the result
      Parameters:
      query - the query to invoke, not null
      Returns:
      the query result, null may be returned (defined by the query)
      Throws:
      DateTimeException - if unable to query (defined by the query)
      ArithmeticException - if numeric overflow occurs (defined by the query)

    • adjustInto

      public Temporal adjustInto​(Temporal temporal)
      Adjusts the specified temporal object to have this instant.

      This returns a temporal object of the same observable type as the input with the instant changed to be the same as this.

      The adjustment is equivalent to using Temporal.with(TemporalField, long) twice, passing ChronoField.INSTANT_SECONDS and ChronoField.NANO_OF_SECOND as the fields.

      In most cases, it is clearer to reverse the calling pattern by using Temporal.with(TemporalAdjuster): 

         // these two lines are equivalent, but the second approach is recommended
   temporal = thisInstant.adjustInto(temporal);
   temporal = temporal.with(thisInstant);

      This instance is immutable and unaffected by this method call.

      Specified by:
      adjustInto in interface TemporalAdjuster
      Parameters:
      temporal - the target object to be adjusted, not null
      Returns:
      the adjusted object, not null
      Throws:
      DateTimeException - if unable to make the adjustment
      ArithmeticException - if numeric overflow occurs

    • until

      public long until​(Temporal endExclusive, TemporalUnit unit)
      Calculates the amount of time until another instant in terms of the specified unit.

      This calculates the amount of time between two Instant objects in terms of a single TemporalUnit. The start and end points are this and the specified instant. The result will be negative if the end is before the start. The calculation returns a whole number, representing the number of complete units between the two instants. The Temporal passed to this method is converted to a Instant using from(TemporalAccessor). For example, the amount in seconds between two dates can be calculated using startInstant.until(endInstant, SECONDS).

      There are two equivalent ways of using this method. The first is to invoke this method. The second is to use TemporalUnit.between(Temporal, Temporal): 

         // these two lines are equivalent
   amount = start.until(end, SECONDS);
   amount = SECONDS.between(start, end);
      The choice should be made based on which makes the code more readable.

      The calculation is implemented in this method for ChronoUnit. The units NANOS, MICROS, MILLIS, SECONDS, MINUTES, HOURS, HALF_DAYS and DAYS are supported. Other ChronoUnit values will throw an exception.

      If the unit is not a ChronoUnit, then the result of this method is obtained by invoking TemporalUnit.between(Temporal, Temporal) passing this as the first argument and the converted input temporal as the second argument.

      This instance is immutable and unaffected by this method call.

      Specified by:
      until in interface Temporal
      Parameters:
      endExclusive - the end date, exclusive, which is converted to an Instant, not null
      unit - the unit to measure the amount in, not null
      Returns:
      the amount of time between this instant and the end instant
      Throws:
      DateTimeException - if the amount cannot be calculated, or the end temporal cannot be converted to an Instant
      UnsupportedTemporalTypeException - if the unit is not supported
      ArithmeticException - if numeric overflow occurs

    • atOffset

      public OffsetDateTime atOffset​(ZoneOffset offset)
      Combines this instant with an offset to create an OffsetDateTime.

      This returns an OffsetDateTime formed from this instant at the specified offset from UTC/Greenwich. An exception will be thrown if the instant is too large to fit into an offset date-time.

      This method is equivalent to OffsetDateTime.ofInstant(this, offset).

      Parameters:
      offset - the offset to combine with, not null
      Returns:
      the offset date-time formed from this instant and the specified offset, not null
      Throws:
      DateTimeException - if the result exceeds the supported range

    • atZone

      public ZonedDateTime atZone​(ZoneId zone)
      Combines this instant with a time-zone to create a ZonedDateTime.

      This returns an ZonedDateTime formed from this instant at the specified time-zone. An exception will be thrown if the instant is too large to fit into a zoned date-time.

      This method is equivalent to ZonedDateTime.ofInstant(this, zone).

      Parameters:
      zone - the zone to combine with, not null
      Returns:
      the zoned date-time formed from this instant and the specified zone, not null
      Throws:
      DateTimeException - if the result exceeds the supported range

    • toEpochMilli

      public long toEpochMilli()
      Converts this instant to the number of milliseconds from the epoch of 1970-01-01T00:00:00Z.

      If this instant represents a point on the time-line too far in the future or past to fit in a long milliseconds, then an exception is thrown.

      If this instant has greater than millisecond precision, then the conversion will drop any excess precision information as though the amount in nanoseconds was subject to integer division by one million.

      Returns:
      the number of milliseconds since the epoch of 1970-01-01T00:00:00Z
      Throws:
      ArithmeticException - if numeric overflow occurs

    • compareTo

      public int compareTo​(Instant otherInstant)
      Compares this instant to the specified instant.

      The comparison is based on the time-line position of the instants. It is "consistent with equals", as defined by Comparable.

      Specified by:
      compareTo in interface Comparable<Instant>
      Parameters:
      otherInstant - the other instant to compare to, not null
      Returns:
      the comparator value, negative if less, positive if greater
      Throws:
      NullPointerException - if otherInstant is null

    • isAfter

      public boolean isAfter​(Instant otherInstant)
      Checks if this instant is after the specified instant.

      The comparison is based on the time-line position of the instants.

      Parameters:
      otherInstant - the other instant to compare to, not null
      Returns:
      true if this instant is after the specified instant
      Throws:
      NullPointerException - if otherInstant is null

    • isBefore

      public boolean isBefore​(Instant otherInstant)
      Checks if this instant is before the specified instant.

      The comparison is based on the time-line position of the instants.

      Parameters:
      otherInstant - the other instant to compare to, not null
      Returns:
      true if this instant is before the specified instant
      Throws:
      NullPointerException - if otherInstant is null

    • equals

      public boolean equals​(Object otherInstant)
      Checks if this instant is equal to the specified instant.

      The comparison is based on the time-line position of the instants.

      Overrides:
      equals in class Object
      Parameters:
      otherInstant - the other instant, null returns false
      Returns:
      true if the other instant is equal to this one
      See Also:
      Object.hashCode(), HashMap

    • hashCode

      public int hashCode()
      Returns a hash code for this instant.
      Overrides:
      hashCode in class Object
      Returns:
      a suitable hash code
      See Also:
      Object.equals(java.lang.Object), System.identityHashCode(java.lang.Object)

    • toString

      public String toString()
      A string representation of this instant using ISO-8601 representation.

      The format used is the same as DateTimeFormatter.ISO_INSTANT.

      Overrides:
      toString in class Object
      Returns:
      an ISO-8601 representation of this instant, not null